JS coating is a kind of two parts waterproof coating which is a composition of polymer emulsion and inorganic powder. It is a new type of waterproof coating that bears excellent performance owing to the introduction of foreign advanced technology and the integration of high elasticity of organic materials and durability of inorganic materials.
Carry out construction directly on many kinds of wet and dry material’s base.
Non-toxic, Non-polluting, applied to drinking water project.
High intensity, high ductility, excellent durability.
High bonding strength between coating layer and base layer.
Easy operation, safe and short project time
Can mix a variety of color products according to the need of engineering design.
Detail Enhancement: work a cloth two coating additional layer on coat convex & concave corner, tube root, draining outlet, deformation joint, defect joint,etc.
Mixing: put the powder into the emulsion little by little according to the required proportion, low-speed mixing to uniform and no mass
Weigh accuracy , mix ingredients uniform, no stack, coat next layer when the previous one getting solidify.
Coating Temp. should be above 5℃,8 hours before raining,water storage test 48 hours later after solidification.
Shelf time: 12 months stored in cool and dry places.
Packaging & Shipping
Liquid component: 50kg/barrel
Powder component: 21kg/barrel
As an member of Chemical Grouting Sub-Committee, Chinese Hydraulic Engineering Society, the Director Member of Waterproof Sub-Committee and China Construction Industry Association.LANGWEI Conchem is a fast growing international manufacturer of construction chemicals with plants in Beijing, China. The company is specialized in preventative and remedial waterproofing products. Preventative waterproofing products are wildly used during new construction and are usually installed by the general contractor. Examples are bentonite strips, hydrophilic mastics and rubbers, which swell in contact with water and hence block water ingress, injection hoses, which can be injected at a later stage to block water and finally cementitious coatings for basement waterproofing and elastomeric membranes for tanks and roofs. Remedial waterproofing products are mostly used when major (or minor) water leaks happen at a later stage and are usually applied by specialist applicators. Remedial waterproofing products are also often used during construction of tunnels and other underground constructions to prevent infiltrating water from hindering the normal progress of the works. Examples are injection resins based on polyurethanes (both 1C and 2C) and poly-acrylates. These products are also used for soil and rock stabilization, together with organo-minerals. LANGWEI Conchem also manufactures a series of products for the protection and repair of reinforced concrete. Examples are cementitious grouts and mortars, epoxy injection resins, carbon fibre laminates and epoxy glues