Good quality of injection tube for cement suspensions

FOB Reference Price:Get Latest Price
US $2-8 / Meters | 100 Meter/Meters (Min. Order)
Report Suspicious Activity
Overview
Quick Details
Place of Origin:
Beijing, China (Mainland)
Brand Name:
LW
Model Number:
LW0916
Type:
Other Waterproofing Materials
name:
injection tube
color:
orange
usage:
grouting
material:
PVC
Supply Ability
Supply Ability:
10000 Meter/Meters per Month
Packaging & Delivery
Packaging Details
50m/roll
Port
Tianjin or Shanghai
Lead Time :
Within 2 days

Advantages:

 

1.No time-consuming sealing by injection packers

2.Reasonable, technical method for preventives as well as additional sealing

3.Low conssumption of injection material

 

Example of Application:

 

1.Buildings in ground water area(white tank)

2.Especially in Wall/base area

3.For tube ducts(aim: sealing)

4.Waterworks and wastewater treatment plants, clear-water reservoirs, underground car parks, tunnels, etc

 

 

Reaction resins and cement suspensions:

 

 

Injection hose1:

Outside Φ 13mm and internal Φ 6mm

Reel with 120m

Customize (minimum order 10m)

 

Injection material:

PUR foaming resin

PUR resin

EP resin

Cement suspension

 

Injection hose2:

outside Φ 11mm and internal Φ 5mm

Reel with 100m

Customized (minimum order 10m)

 

Injection material:

PUR foaming resin

PUR resin

EP resin

Cement suspension

 

Installation:

 

The injection hose shall be fixed tightly at the hardened concrete building component by continuous anchoring so that it can not float on fresh concrete

 

The fixing of the hose can be carried out by:

1.Mounting clips

2.Fixations for injection hoses

 

Normally the fixations are placed with a distance between them of about 15cm. if necessary this distance must be adapted to on-site conditions

 

Information about Installation:

 

1.Length of injection hose: about 10-12m

2.Injection hose must lie flat on the concrete to avoid any reduction of cross section

3.Fix injection hose, e.g. with mounting clips

4.Distance of injection hose to the outside of wall

5.The hoses shall overlap by at least 15cm and should lie parallel at a distance of about 3-5cm

6.Enter psition of injection hoses in the drawings