Professional Grout Pump Machine, Resin Injection Pump
The electric high pressure injection pump is a professional machine used for high pressure chemical grouting, which works with both single and double component grouting material. It can produce high pressure itself. When there are leakage-stop constructions on engineering include architecture, underground, water conservancy, environment protection, civicism, subway, tunnel, culvert, crack reinforcement, it is the preferred equipment.
PU foam agent, Epoxy resin. Polyurethane, acrylic resin injection pump
1. Portable,high pressure
2. Output pressure up to 11000psi(max)
3. Easy operation,safe
Maximum output pressure
Pressure of starting again
less than 7500psi
Safe range of high-pressure hose
less than 1500
Safe range of switch valve
less than 15000psi
the length of hose
Leak-stoppage, waterproof & reinforcement for concrete structure, such as
basement, floor, the second joints, subway, tunnel, Continuous wall, cracks,
water seepage, etc.
Grout Pump Machine, Resin Injection Pump
Epoxy and Resin injection pump for concrete repairing , concrete repair injection pumps
Single Component Injection Pump It is the professional machine which is applied in the structure perfusion, equipped with super pressure. To solve out the inconvenience of the carrier, it is very light and it is the best choice of stanch worker. Speedy Construction : can be advanced to 5000PSI in a few seconds, and the working time will be shorter than other machine.
Low gross, easy to carry.
Simple maintenance:can be fixed without special training, to avoid the delay for the machine fixing.
Standing Pressure: can be affused into the small slot effetively, and envelop the leaking.
grout pump specifications:
Gross: 9 Kg Power: 560w single-phase alternating current 220v/50Hz
Max Output Pressure: 11000 PSI
Star-up: < 7500 PSI
Safety Scope of High-pressure pipe: < 14000 PSI
Safety Scope of On-off Valve: < 18000 PSI
Safety Scope of Butter Head: < 16000 PSI
LangWei Conchem is a fast growing international manufacturer of construction chemicals with plants in Beijing, China. The company is specialized in preventative and remedial waterproofing products.
Preventative waterproofing products are wildly used during new construction and are usually installed by the general contractor. Examples are bentonite strips, hydrophilic mastics and rubbers, which swell in contact with water and hence block water ingress, injection hoses, which can be injected at a later stage to block water and finally cementitious coatings for basement waterproofing and elastomeric membranes for tanks and roofs.
Remedial waterproofing products are mostly used when major (or minor) water leaks happen at a later stage and are usually applied by specialist applicators. Remedial waterproofing products are also often used during construction of tunnels and other underground constructions to prevent infiltrating water from hindering the normal progress of the works. Examples are injection resins based on Polyurethanes (both 1C and 2C) and Poly-acrylates. These products are also used for Soil and Rock Stabilization, together with Organo-minerals.
LangWei Conchem also manufactures a series of products for theProtection and Repair of reinforced Concrete. Examples are cementitious grouts and mortars, epoxy injection resins, carbon fibre laminates and epoxy glues.
LangWei Conchem is specialized in preventative and remedial waterproofing products, which are mostly used in Balcony waterproofing, car part decks, concrete repair and protection, facade waterproofing, flooring systems, injection equipments, packers & accessories, preventative waterproofing, remedial waterproofing, roof waterproofing, sewer rehabilitation, soil injections, tunel applications and so on.